http://i1092.photobucket.com/albums/i413/mtgsd/support/ossbannerdeskcom57.png?width=699&height=129&xn_auth=no&type=x-png
Welcome, Guest Login

Support Center

Troubleshooting HIB25-x8

Last Updated: Dec 06, 2017 12:09PM PST
Problem:
I am using HIB25-x8  for my backplane connecting to a computer bu it  is not getting solid Link (between Host and Target card).  Only CBL LEDs is ON, the EDGE is OFF.


Things to check / try:

1. Make sure you have the target card installed in the OSS backplane and the host card inside the host computer. To identify the target card, there should be 3 components populated on the top left side of the card, see photos below ( TargetCard&HosCard2.png).
   
2. Make sure the target card is installed in the correct Target Slot, which is next to the ATX power connector, see attached photo as reference (TargetCard&Slot.png).
      
3. Try another set of Host and Target cards.

4. Replace the backplane.





 

Contact Us

  • Email Us
  • Support Resources
      Videos
      Documents
      Software
      Troubleshooting
desk@onestopsystems.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete