One Stop Systems | Manuals ION Accelerator 2.4.1

To configure multipathing on Windows Server 2012, 1. Open the MPIO Control Panel and type mpio in the search ...

Mar 16, 2018 02:25PM PDT

To discover multipaths that exist in your configuration, 1. Verify that multiple instances actually represent...

Mar 16, 2018 02:27PM PDT

The instructions in this section apply to multipathing for Windows Server 2008 R2. Each initiator iSCSI port s...

Mar 16, 2018 02:29PM PDT

For the example used in this configuration, the following items should be noted: • The Windows 2008 R2 initiat...

Mar 19, 2018 12:48PM PDT

1. From ION Accelerator (standalone or HA), create an initiator group in the CLI: inigroup:create W2K8 Id W2K...

Mar 19, 2018 12:51PM PDT

INSTALLING MPIO ON LINUX The basic components for Linux multipathing are described below. • dm_multipath kern...

Mar 19, 2018 01:00PM PDT

If you are using the iSCSI protocol, you need to set the node.session.timeo.replacement_timeout value. NOTE:T...

Mar 19, 2018 01:08PM PDT

SETTING UP LINUX ISCSI INITIATORS For the example used in this configuration, the following items should be n...

Mar 19, 2018 01:16PM PDT

The iontuner utility does performance tuning for Linux-based initiators used with ION Accelerator. It is avail...

Mar 19, 2018 01:40PM PDT

ION KB-Support